Catalog
2 Flute Aluminum Endmills
The ALU series end mills are designed for roughing and finishing operations for non-ferrous materials. They are built with a 48 degree helix and a double flute design allowing for increased finishes and chip clearance for faster speeds and feeds. The ALU series and the ALU-STUB tools are offered uncoated as well as TiCN coated. To order this tool with the TiCN coat, please specify series #TC6349.
ALU series
| CID PART # | FLUTE DIAM. | SHANK DIAM. | FLUTE LENGTH | OAL | # OF FLUTES |
|---|---|---|---|---|---|
| ALU1250 | 1/8 | 1/8 | 3/8 | 1-1/2 | 2 |
| ALU1562 | 5/32 | 3/16 | 9/16 | 2 | 2 |
| ALU1875 | 3/16 | 3/16 | 9/16 | 2 | 2 |
| ALU2187 | 7/32 | 1/4 | 3/4 | 2-1/2 | 2 |
| ALU2500 | 1/4 | 1/4 | 3/4 | 2-1/2 | 2 |
| ALU2812 | 9/32 | 5/16 | 13/16 | 2-1/2 | 2 |
| ALU3125 | 5/16 | 5/16 | 13/16 | 2-1/2 | 2 |
| ALU3437 | 11/32 | 3/8 | 1 | 2-1/2 | 2 |
| ALU3750 | 3/8 | 3/8 | 1 | 2-1/2 | 2 |
| ALU4062 | 13/32 | 7/16 | 1 | 2-3/4 | 2 |
| ALU4375 | 7/16 | 7/16 | 1 | 2-3/4 | 2 |
| ALU4687 | 15/32 | 1/2 | 1-1/4 | 3 | 2 |
| ALU5000 | 1/2 | 1/2 | 1-1/4 | 3 | 2 |
| ALU6250 | 5/8 | 5/8 | 1-5/4 | 3-1/2 | 2 |
| ALU7500 | 3/4 | 3/4 | 1-5/8 | 4 | 2 |
| ALU1000 | 1 | 1 | 2 | 5 | 2 |
ALU-STUB series
| CID PART # | FLUTE DIAM. | SHANK DIAM. | FLUTE LENGTH | OAL | # OF FLUTES |
|---|---|---|---|---|---|
| ALU-STUB1250 | 1/8 | 1/8 | 1/4 | 1-1/2 | 2 |
| ALU-STUB1875 | 3/16 | 3/16 | 5/16 | 2 | 2 |
| ALU-STUB2500 | 1/4 | 1/4 | 3/8 | 2-1/2 | 2 |
| ALU-STUB3125 | 5/16 | 5/16 | 7/16 | 2-1/2 | 2 |
| ALU-STUB3750 | 3/8 | 3/8 | 1/2 | 2-1/2 | 2 |
| ALU-STUB4375 | 7/16 | 7/16 | 9/16 | 2-3/4 | 2 |
| ALU-STUB5000 | 1/2 | 1/2 | 5/8 | 3 | 2 |
| ALU-STUB6250 | 5/8 | 5/8 | 3/4 | 3-1/2 | 2 |
| ALU-STUB7500 | 3/4 | 3/4 | 1 | 4 | 2 |
| ALU-STUB1000 | 1 | 1 | 1-1/4 | 5 | 2 |